Walls

Instructions on how to glue vinyl wallpaper on a paper basis

The process of working with vinyl wallpaper is not difficult The process of working with vinyl wallpaper is not difficult The renovation in the kitchen is almost complete and in order to transform the walls, you decided to stick vinyl wallpaper with a paper base on them. The question immediately arises – how to do it technically correctly? It is imperative to deal with this, so as not to redo all the work again later..

Advantages and disadvantages

In the middle of the 20th century, paper-backed vinyl wallpaper was already actively used. This material was very trendy and incredibly popular..

The fact is that such wallpapers have a lot of advantages:

  • attractive appearance;
  • abrasion resistance;
  • great strength;
  • ease of removal of contamination.

The main advantage of using paper backed vinyl wallpaper in the kitchen is its abrasion resistance. The main advantage of using paper backed vinyl wallpaper in the kitchen is its abrasion resistance.

Unfortunately, it was not without a number of disadvantages:

  • the lower paper layer is less durable;
  • the paper can stretch easily when the glue is absorbed;
  • slight difficulty in pasting.

However, these shortcomings are almost invisible with the undoubted advantages of this wallpaper. In addition, given the low price, this type of wallpaper is out of competition..

Wallpaper for the kitchen (video)

Types of vinyl wallpaper for the kitchen

There are many types and types of vinyl wallpaper. Their classification is huge, but the main qualities can be distinguished.

According to the structure of its surface, vinyl wallpaper is divided into:

  • embossed,
  • smooth.

Methods of surface finishing when pasting with vinyl wallpaper with a paper base are as follows:

  • profile,
  • embossed.

All types of vinyl wallpaper are made by spraying onto the substrate with the desired vinyl layer. The types of processing are also varied..

Embossed vinyl wallpaper has an embossed structure Embossed vinyl wallpaper has an embossed structure Smooth wallpaper texture is achieved by spraying Smooth wallpaper texture is achieved by spraying

Profile-type vinyl wallpaper is easier to clean, since it does not have recesses in its structure Profile-type vinyl wallpaper is easier to maintain, since it does not have recesses in its structure

This could be:

  • Silkscreen. It is used for lightweight wallpapers. A thin layer of PVC is applied to the paper. With the help of hot stamping on PVC, you can create various textures. Silkscreen design is different.
  • Compact vinyl. The vinyl layer can look like fabric, natural stone, or all kinds of plaster..
  • Heavy vinyl. This type is embossed and practical. Heavy vinyl creates 3D embroidery and crinkled leather effects.
  • Chemical embossing. These wallpapers have a glossy smooth surface, from which any dirt can be easily removed. They are also distinguished by their solid strength, as well as resistance to sunlight and moisture..

Paper-based vinyl wallpaper textures (video)

Materials and tools required

For pasting the kitchen with vinyl wallpaper with a paper base, you will need:

  • building level;
  • ruler;
  • roller;
  • knife;
  • small brush;
  • brushes to apply primer and glue;
  • putty knife;
  • sponges to remove excess glue from the wallpaper;
  • scapula.

Preparation phase

Before gluing the wallpaper, all surfaces must be carefully prepared. The walls must be flat. They should not have the slightest cracks, defects and remnants of old material. By the way, it can be easily removed if you wet it first and then scrape it off with a spatula. Do not forget that you will need to remove all switches and sockets if you have them in this small room..

Wall treatment before wallpapering prolongs the life of the coating Wall treatment before wallpapering prolongs the life of the coating

With the help of a fungicidal agent, additional treatment of the walls is carried out. Thus, the chance that fungus will never appear on them increases. When this treatment is completed, you will need to wait until the surfaces are completely dry..

It is also necessary to isolate all possible sources of intense air intake. This condition is required..

Finally, you need to prepare the wallpaper itself. Before sticking them on, you will need to carefully measure and cut off the desired strip. In this case, it is necessary to add to its length an average of about 10 centimeters.

How to glue paper backed vinyl wallpaper. Gluing instructions in the kitchen

All wallpapers that are made on a paper basis are never glued directly to the wall.

The glued strip of wallpaper must be carefully smoothed out with a roller, squeezing out all the air The glued strip of wallpaper must be carefully smoothed out with a roller, squeezing out all the air Be very careful when aligning the top edges of the glued strip. Be very careful when aligning the top edges of the glued strip.

Initially you need:

  • spread wallpaper on the floor;
  • smear them with glue;
  • fold this material three times to each other with a greased base;
  • leave in this position for a short period of time.

The last point depends on the individual characteristics of certain wallpapers. You can find out the right amount of time in the instructions written on the package. The glue will definitely need to be applied in equal layers..

Wallpaper joints require additional leveling with a roller or a piece of old fabric Wallpaper joints require additional leveling with a roller or a piece of old fabric

Further, the algorithm of actions is as follows:

  • pasting starts from the corner;
  • the stripes will not go wrong if you use the building level at this stage;
  • the glue must be wiped off immediately if it gets on the side of the picture;
  • it is forbidden to stretch the material during pasting in width, as this can lead to the appearance of various kinds of irregularities, as well as deformation;
  • an overlap of 3 centimeters is left in the corner on the other wall;
  • the canvas is superimposed in a corner when gluing the strips on the other side;
  • all excess material is trimmed with a sharp knife;
  • the skirting board must be removed in advance so that the wallpaper looks neat.

On average, vinyl wallpaper should dry for at least two days..

So, pasting a kitchen with paper-based vinyl wallpaper does not seem to be a difficult process. It is enough to use the above recommendations, and this room will attract the enthusiastic glances of guests..

Gluing vinyl wallpaper (video course)