You can use the secret combination that is in every doorphone Quite often there is a problem when the keys to the doorphone are lost or forgotten, however, there is a way out, this is to enter a special code that was set by the manufacturer of this doorphone. All details below.
We figure out how to open the intercom
An intercom kit is necessary in order to ensure security at the entrance of an apartment building, since criminals usually wait for the victim in open, unprotected entrances to get into the apartment. Also, the intercom ensures order and cleanliness in the entrance, as it scares off lumpen and outcasts.
Each company producing this product, competing with other firms, strives to secure its device and develops control software that is different from others, naturally, entering its own combinations of numbers
You need to know that entering a special pin code with mercenary intentions is punishable by law.
Modern intercoms have not only the ability to communicate, record a conversation, but also video surveillance, which gives 100% security. Many intercoms are equipped with a special code so that you can open (if you forgot or lost the key) in emergency situations (unlocking), as well as a loud emergency notification system when people are evacuated from a building in case of fire, earthquake and other situations.
When using the intercom, you should adhere to the following instructions:
- When leaving the entrance, you must press the button under the screen and wait for the sound signal, only then leave.
- When entering the entrance, you must lean the key-chip against the reading panel of the intercom device, when a sound signal (impulse) sounds, you can unlock the front door.
- After exiting or entering the entrance, you cannot help the door to close, it will close itself with the help of a hydraulic closer.
- If you push and help the door to close, then this can lead to breakage of the door closer..
The main components of the intercom are: name plate of the company, a call unit, a primary power supply, an independent switching unit, an independent electromagnetic lock that magnetically attaches a magnet to the door plate, a door closer, a call button, apartment blocks, a keyboard.
Intercoms are divided into multi-subscriber and low-subscriber, according to the technical device, into multi-wire and two-wire. In the age of new technologies, there are intercoms that receive and transmit a signal using Wi-Fi, based on optical fiber.
Do not panic if you do not have the keys to the intercom with you, or if it is demagnetized, the encoding has flown off (recoding and programming is required). You can deceive any intercom using a universal key-chip, which is available to ambulance doctors, police, postmen (postmen), house management, Internet communications (Rostelecom). These keys are made in the form of a special tablet, radio key fobs, a two-pin key and are issued legally to employees of special services.
Description of the method: how to open the intercom with Metakom
Domestic-made Metakom intercom is used for apartment buildings to protect against unwanted guests. What to do to open the intercom, is this even possible?
Intercoms are produced by many different companies, both in Russia and around the world. Therefore, they do not have a single (universal) set of necessary numbers.
The main thing is not to break the screen, but to make (restore) the lock by entering a combination.
To open the Metacom intercom without a screen, you need to dial a special combination consisting of several numbers and letters. Firstly, press the button responsible for the apartment number – B. Secondly, dial the code 5702.
If the intercom does not open, then you can try to enter the codes:
If the intercom is Metakon MK-20M / T series, forward or Pro, then you must enter similar combinations or a pin code (B + 27, B + 5702). It takes a very long time to go through all the codes and you can either wait for someone to enter or leave the entrance, or call the neighboring apartment and say that you are a neighbor and have forgotten the keys. And remember that the use of all machinations with mercenary or robbery intentions is punishable by law..
Example: how to open the intercom Visit
Intercom Visit is one of the most reliable devices and is adapted to such harsh conditions as low and high temperatures, wind, rain. The intercom body has an anti-corrosion coating, which ensures reliability.
“VIZIT” has a factory setting of 12 # 345 or * # 4230. But recently released models can be opened by entering 67 # 890 or * # 423
The intercom of this model works in a humid climate. Average service life – about 10 years.
Intercom An emergency visit can be opened with a special code, you should log in to its menu and dial # 999. After 2 signals are triggered, enter 1234. You need to wait a little and after a short signal dial 2 # 3535.
If, after entering the combination 1234, there was no short signal, but a signal similar to two-tone or others was heard, then you can enter other combinations:
After the dialed combination, you must enter 2 # 3535. Relevant for the following models: Vizit N-100, Vizit SM-100, Vizit BVD-341, Vizit BVD -313 and others.
How to open the Cyfral intercom
The digital has many models: Digital INTEL, Digital CCD-20.40, Digital CCD-40TS, Digital CCD-2087.2TV, Digital CCD-2087.2T, Digital CCD-2087.2T R, Digital M-10MP, Digital M-10MT, Digital M-20MTV, Tsifral M-20MZV.
To open the Cyfral intercom, you need to have a special master key or know the password
For the Cyfral intercom of the usual model, to open without a key, you must enter the following numbering:
- Call + 100 + 2323;
- Call + 200 + 2323;
- Call + 300 + 2323;
- Call + 400 + 2323;
- Call + 500 + 2323;
- Call + 600 + 2323;
- Call + 700 + 2323;
- Call + 800 + 2323;
- Call + 900 + 2323;
- Or choose the following combination Call + number + 2323 or 7272, 7273.
It takes time to find the code, it is better to call your flatmate. It is easy to open the Cyfral M intercom using the Call + 37 or Call + 3792 combination. The Cyfral CCD-2094.1M intercom opens with the Call + 0000 code, after which the display will show ON, you must enter 2.
If these operations do not work, then the factory access code was changed by housing and communal services employees.
If you are with a resident of this house, then you can find out the access code from them if the key was lost. The on-door speakerphone of the Cyfral CCD-2094M model can be opened by dialing the combination 0000 + call, after the entered, the display will show the message cod. 123456 + call, if it does not work, enter 456999 + call, or 123400 + call, after that f0 appears on the intercom display, then enter 601.
Tips: how to hack Rainmann intercom
Hacking the Rainmann 2000 doorphone is possible by entering the combination – key + 987654, after the double signal of the doorphone, enter 123456, after which R. appears on the display.The letter P on the display monitor indicates that you have entered the service menu, in which you can control by means of numbers and program the code with your own hands.
A single number is entered:
- 4 – block and disable the Rainmann intercom;
- 6 – turn off Rainmann;
- 8 – open (the door is demagnetized).
Rainmann CD-2000 and AO-3000. In order to open the 2000th model, you need to click on the “key”, then enter the code “987654”. After that, the intercom will squeak and you must enter the numbers “123456”. If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door – you need to click on the number 8
The intercom of any DomoGuard model can be opened by entering the combination С + 669900 + call + enter a number 1 unit greater than the number of the last apartment in the entrance. After dialing the combinations, the intercom display will show F, which will mean the exit to the service menu. After that, we dial the code 080 to enter a new key 2, 2, 2 into the intercom memory. To disable the door lock – 071.
Instructions: how to open the Eltis intercom
All Eltis doorphone models open after entering a special combination, however, if the entered combination does not open the door, then the factory settings have been changed. Intercom Eltis (Eltis) can be opened by entering a universal code, which can be used to deceive the protective device.
You need to press and hold the call key for 20 seconds. A five-digit code will appear on the equipment display for a while. Then this combination will disappear, so it needs to be remembered. This password will provide an opportunity to enter the settings menu
- Call + 973;
- Call + 7456;
- Call + 2323.
With the same combinations, in which the call button is pressed at the beginning, you can open the following types (entrance intercoms) – Tekhkom, Stroymaster, Marshal, Belsplat (Belsplat), Kamsan, Condor, Lock, Poly, Filman, Polylock, Smartel, Laskomex, Modus, Polis and others.
The intercom of the Factorial brand of different models can be opened without a key by entering a special software access code – 000000 + 123456, 5 + 3453475 + call + 7 + call.
Houses equipped with an intercom are ubiquitous, but not many people know how to open them without a key.
The Keyman intercom can be opened by entering – K + 100 + 789, after the signal has sounded, enter 123456. After the Keyman P is displayed on the display, which allows you to enter the menu, enter 8. If the intercom has a touch screen, then in winter you can open by snowball applications to the screen, hypothermia can ruin the intercom.
It is also possible to open the device using the piezoelectric element of the lighter, which is applied to the place for the key, but this does not always work and weakly.
Intercom Barrier II, 2M and 4 can be opened by pressing 2 + 4 or 2 + 7. You can also magnetize the place where the key is applied and magnetized with a magnet. In the same way, you can open the Arcade intercom with an empty plastic key.
The Raikmann and Rainmann and Smartel intercom can be opened like this:
- Key + 321654;
- After the beep, enter the numbers 123456;
- When P appears on the display, enter 8 or recode with a shocker or stun gun, which with its impulse can turn off the intercom.
Blink intercom is the only audio intercom installed in Belarus, Ukraine, Kazakhstan and you can open it using a D9-0.1, 6F22 battery that we put in a turnkey place. And the intercom Cron, Pierrs and Safe can be opened using the factory combination 951. Intercom Pier 1000 Micro can be opened using the factory access code – 12345678 + K + 1234 or 8310649 + entrance number.
You should know: how to find out the code from the intercom
The intercom is the most reliable device for protecting multi-storey buildings, garages and private houses. The tenants of the building or the owner of the garage must know the password and secret codes for the emergency opening of the intercom. This password is used if the key from the intercom was lost or forgotten.
If at the entrance you find that there is no key to the intercom, first of all it is better to contact the neighbors
It is not recommended to divulge the secret of the password to friends in order to avoid theft and hooliganism at this address.
If the key to the intercom is lost and the password has been forgotten, it is not possible to open the door, then you need to call using the phone to the housing and communal services, service or company, a single service center that installed this intercom device so that the master can unlock the combination locks. Remember that unauthorized entry and hacking of the intercom at the entrance of a house on a foreign territory is responsible for their actions..
Why not enter codes and physically try to open the intercom without a key? There is an instruction where it is written that it is strictly forbidden during the operation of the intercom to cause any mechanical damage to the call unit, handset, electronics unit, electromagnetic lock, opening button and the intercom case with various objects that can lead to damage to the device or its individual elements.
Mechanical damage also includes rubbing with snow, dousing with water, heating by fire, dousing with paint and other solutions, use a magnetic key with an electromagnet, rip out buttons, repair the device yourself or encode it.
It is forbidden to independently perform recoding, unlocking or other actions by a person who is not a service worker of the intercom device. Do not pull the door behind you, which can lead to damage to the hydraulic closer. The closing speed of the access door is set by the master, depending on the design features of the door and adjusting screws.
How to open an intercom without a key (video)
In conclusion, it should be noted that it is forbidden to put foreign objects under the door from the inside and outside that interfere with the self-closing of the door and lead to unauthorized entry of strangers into the territory..