Bedroom

Rules for the selection and installation of lamps for bedrooms

A variety of lamp models are suitable for decorating a bedroom. The most popular options are bedside lamps and floor lamps. A variety of lamp models are suitable for decorating a bedroom. The most popular options are bedside lamps and floor lamps. What kind of lamps are suitable for the bedroom? To decorate bedrooms, you can use sconces, products with touch switches, spotlights or lamps made of polymer. Any lighting fixture can be placed on a wall or cabinet located near the bed. If desired, it is easy to make stylish light sources with your own hands from improvised means.

Resin bedroom wall lights

Luminaires made of polymer are very popular as they complement the design beautifully and are relatively cheap. Polymer products are most often used as lighting fixtures for a children’s bedroom or living room..

Polymer wall lamps - an inexpensive and stylish solution Polymer wall lamps – an inexpensive and stylish solution

The advantages of polymer lamps:

  1. Durability. Modern lamps made of polymer materials last 2-3 times longer than conventional wall lamps or hanging spotlights.
  2. Waterproof and heat resistant. Polymer lamps do not deform under the influence of moisture or temperature extremes, and products made of polyamides are shock-resistant.
  3. Low cost. Stylish lamps made of polymers are 1.5-2 times cheaper than ordinary sconces or LED spotlights.
  4. Versatility. These products look beautiful in any interior. In addition, such luminaires can be conveniently positioned. Polymer products are most often installed on walls, however, you can purchase a model with a leg and install the lighting device on a bedside table or cabinet.

When buying a polymer luminaire, be sure to read the technical documentation. If phenol was used to make a lighting device, then such a product can release toxic substances under the influence of high temperature..

Children’s bedroom bedside lamps

To decorate a children’s bedroom, it is best to use bedside sconces of an unusual configuration. They create a subdued light and look discreet. Usually, bedside sconces are installed at a height of 1.5-2 meters above the floor..

For a children's bedroom, bedside lamps with soft, diffused light are best suited. For a children’s bedroom, bedside lamps with soft, diffused light are best suited.

There are 3 types of bedside sconces:

  • Wall-mounted products. Such sconces are usually equipped with a lampshade, and are installed above the bed..
  • Lighting devices with shades. These sconces have an unusual configuration. As a rule, such products have a rectangular or oval shape..
  • Sconces on which hanging lampshades are installed. Such products are expensive, however, they look the most beautiful. Sconces with hanging shades can be installed at any height.

When using sconces, it is recommended to use halogen lamps, as they create a dim light and do not consume a lot of electricity..

Choosing lamps for the bedside table in the bedroom

If you do not like wall sconces or polymer lamps, you can choose products that are installed on the nightstand. When choosing such a lighting device, you need to take into account a number of nuances. First of all, you need to consider the design of the bedroom. Classic style or minimalism go well with standard lamps, which are fitted with Tiffany lamps..

When choosing a bedside lamp, you should proceed primarily from the design of the bedroom: the model you like should be in harmony with the design of the room When choosing a bedside lamp, one should proceed primarily from the design of the bedroom: the model you like should be in harmony with the design of the room

When choosing a luminaire, you should also consider:

  1. The type of lamp that is screwed into the luminaire. It is not advisable to use LED or energy-saving lamps, as they can harm the eyes.
  2. The presence of a regulating head. This detail will help regulate the direction of the light..
  3. Lighting device dimensions.

When choosing a lamp for a curbstone, remember that the color of the product and the color of the furniture must match. Otherwise, the lighting fixtures will look tasteless and attract too much attention..

Pendant lamp for the bedroom: types and features

It is rational to install a pendant lamp if your bedroom has high ceilings. Hanging products are usually mounted at a height of 1.2-1.5 meters from the floor. If you decide to use such lighting, then remember that bulbs for hanging products should have a warm glow spectrum..

The pendant lamp will perfectly fit into the interior of the bedroom with high ceilings The pendant lamp will perfectly fit into the interior of the bedroom with high ceilings

Hanging lamps can be designed in the following style:

  • Classic. Such products are made of wood. Classic hanging lamps are usually massive, therefore they are mounted on a strong metal rod..
  • Modern. Lamps of this type have a spherical configuration, and are equipped with an ornament..
  • High tech. Such products are made of metal, and are usually rectangular in shape..
  • Country. Luminaires of this type have the shape of a wheel and are made of wood..

When installing pendant lights, choose such an arrangement so that the products are at a distance of 20-30 centimeters from the corners of the walls..

LED lighting fixtures for living room and bedroom

LED strip lighting is often used when decorating a living room or bedroom. Touch switches are used to control the LED strip. They adjust the brightness and, in some cases, the color of the backlight. If you have a bed built into the closet, and you are tired of ordinary spotlights, you can attach an LED strip to the furniture. However, for this you need to make a special niche and choose a suitable power supply..

LED lights look very impressive and allow you to adjust the brightness and color of the backlight LED lights look very impressive and allow you to adjust the brightness and color of the backlight

The LED luminaire is installed in the following sequence:

  1. Drill a hole in the ceiling for the LED strip.
  2. Pull the wires to the light fixture.
  3. Fix the LED strip with tape or other adhesive material.
  4. Check the functionality of the structure.
  5. Remove excess tape.

If you decide to use powerful lighting devices, then you need to choose a powerful power supply. It is recommended to use power supplies with a capacity of more than 100-120W.

DIY bedroom lighting design

An unusual lamp can be made with your own hands from a plastic bottle. To do this, you will need an energy-saving light bulb, a glue gun, a hacksaw, disposable spoons, and a three-liter bottle..

The luminaire is manufactured in the following order:

  • Cut off the bottom of the bottle and trim off the handles of the spoons.
  • Glue the spoons to the bottom of the bottle. Use a glue gun to do this. Remember spoons should be staggered.
  • Pass the wire through the neck, and connect the lamp to it.
  • Attach the resulting product to the wall. Use double-sided tape or clamps to fix.

If desired, the original lamp can be easily made by hand If desired, the original lamp can be easily made by hand

You can use plywood to make an unusual lamp. To make such a lighting device, in addition to plywood, you will need sandpaper, paint, a drill, an energy-saving light bulb, clamps or a fastening cable..

It is recommended to use thick plywood with the correct shape. Before starting work, it is recommended to sand the plywood edges with sandpaper..

Plywood lamp manufacturing technology:

  1. Cut a hole in the plywood sheet for a light bulb.
  2. Re-sand the plywood.
  3. Paint the resulting workpiece.
  4. Drill a hole for the cord in the workpiece.
  5. Pull the cord and connect it to the light bulb.
  6. Hang the resulting product on the lashing cable.

How to install lamps on the wall in the bedroom

Installing sconces or other wall lights is easy. First you need to level the surface and apply special markings. It is recommended to install the sconce at a distance of more than 100 centimeters from the floor..

Before installing the luminaire, you need to grind the walls and lay the wiring. The resulting strobe must be putty. Do not forget to pre-bring the wires under the lamp and the switch..

There are no difficulties in self-installation of the lamp, the main thing is to strictly follow the instructions and observe safety measures There are no difficulties in self-installation of the lamp, the main thing is to strictly follow the instructions and observe safety measures

How to install a wall lamp:

  • Cut off the electricity.
  • Route the wire under the switch.
  • Insulate the wires.
  • Drill a hole for the base.
  • Attach the luminaire base to the wall with dowels.
  • Remove the first protective layer of the wire and strip off the tip.
  • Disconnect the terminal and pull the wire.
  • Fix the luminaire to the base.

Spotlights as the main lighting in the bedroom

Typically wall lights, bedside sconces or LED strips are auxiliary lighting fixtures. LED spotlights are used as the main lighting fixtures..

LED spotlights have long established themselves as economical and compact primary lighting sources. LED spotlights have long established themselves as economical and compact primary lighting sources.

Advantages of LED spotlights:

  1. Profitability. Such products consume a small amount of electricity..
  2. Security. LED spotlights do not heat up during operation and do not emit harmful substances.
  3. Compactness. These products are compact and do not require the installation of a massive mortgage.

Instead of LED lamps, halogen lamps can be installed in spotlights. However, they get hot during use, so you will need to install a thermal ring..

Lamps for the bedroom (video)

It is best to use a wall lamp as an auxiliary lighting for the bedroom. They do not take up much space, unlike pendant fixtures, and create subdued light. If the bedroom is large, then it is better to opt for an LED strip. It can be glued to a wall or ceiling. It is recommended to use LED spotlights as the main lighting. They have high performance characteristics, and do not get hot during operation..

Design of lamps for bedrooms (photo)